Custom packages

We fabricate our own silencers in house and our own acoustic enclosures, complete with doors, forced ventilation systems, lighting, fire and gas detectors, and oxygen-depletion sensors.

Enclosure, Walk-in Type	Silencer
Silencer	Enclosure, Close-fitting Type

We can provide:

• Purge gas system
• Self-circulating pressurised liquid barrier system (API Standard 682, seal plan 53B)
• Pumped pressurised liquid barrier system (API Standard 682, seal plan 54)
• Pressurised gas barrier system (API Standard 682, seal plan 74)

Seal systems can be mounted on skid or off skid

Filters for Pressurised Nitrogen Barrier System	Pressurised Seal Oil Barrier System
Key-interlocked Changeover Valves for Duplex Filters	Pressurised Seal Oil Barrier System

We can include various means of temperature regulation.

Shell-and-tube Heat Exchanger	Air-blast Cooler (Air Fan / Fin Fan)
Steam Jackets	Cooling Water Jacket

We can include anything from the bare minimum, to fully comprehensive instrumentation meeting offshore specifications. A variety of instrument isolation methods are available.

We can mount instrument displays and junction boxes on a single stand at skid edge, alongside any seal fluid systems.

Instrument Displays	Condition Monitoring
Instrument Stand	Junction Boxes

We can include a local operator panel with push buttons and lamps, suitable for a hazardous area if necessary.

We fabricate our own skids and support frames in house.

We can include walkways, ladders and handrails.

Walkway to Access Enclosure	Walkway to Access Instrument Stand

We can recommend one of our own coating systems, suitable for either on shore or off shore, according to your application. Alternatively, we can use one that complies with your project specification.

Click here to open a new web page on inspection and testing.

We can comply with the legislation of different countries and regions, for example:

Europe

Where applicable, packages will conform to following directives of the European Parliament and of the Council of the European Union, such as:

• 93/68/EEC – CE Marking
• 2014/68/EU – Pressure Equipment Directive (PED)
• 2014/34/EU – Equipment for Explosive Atmospheres Directive (ATEX)

The Customs Union of Russia, Kazakhastan and Belarus

We can comply with the requirements of the Euro-Asian Council for Standardization, Metrology and Certification (EASC).

We can comply with international standards, national standards and company standards, including:

1. International Standards

International Organization for Standardization (ISO)

For example:

ISO 80079

Explosive Atmospheres.

International Electrotechnical Commission (IEC)

For example:

IEC 60034	Rotating Electrical Machines
IEC 60079*	Explosive Atmosphere Standards
IECEx System	System for Certification to Standards Relating to Equipment for use in Explosive Atmospheres.

* We can supply packages suitable for Zone 1 and Zone 2.

2. National Standards

American Gear Manufacturers’ Association (AGMA)

American National Standards Institute (ANSI)

For example:

ANSI/NFPA 70

National Electrical Code (NEC)

American Petroleum Institute (API)

For example:

API Std 541	Form-Wound Squirrel Cage Induction Motors - 375 kW (500 Horsepower) and Larger
API Std 547	General-Purpose Form-Wound Squirrel Cage Induction Motors – 250 Horsepower and Larger’
ANSI/API Std 614 / ISO 10438-1	Lubrication, Shaft-Sealing and Oil-Control Systems and Auxiliaries
API Std 619	Rotary-type Positive Displacement Compressors for Petroleum, Petrochemical, and Natural Gas Industries.
API Std 671	Special-purpose Couplings for Petroleum, Chemical and Gas Industry Services.
API Std 682	Pumps — Shaft Sealing Systems for Centrifugal and Rotary Pumps.
API Std 685	Sealless Centrifugal Pumps for Petroleum, Petrochemical, and Gas Industry Process Service

American Society of Mechanical Engineers (ASME)

For example:

ASME Boiler and Pressure Vessel Code (BPVC), Section II	Materials
ASME Boiler and Pressure Vessel Code (BPVC), Section III	Rules for Construction of Nuclear Facility Components
ASME Boiler and Pressure Vessel Code (BPVC), Section V	Nondestructive Examination
ASME Boiler and Pressure Vessel Code (BPVC), Section VIII*	Rules for Construction of Pressure Vessels*
ASME Boiler and Pressure Vessel Code (BPVC), Section IX	Welding, Brazing, and Fusing Qualifications

* ‘U’ stamp available.

American Welding Society (AWS)

For example:

AWS D1.1

Structural Welding — Steel

Canadian Standards Associations (CSA)

For example:

CSA C22

Canadian Electrical Code (CEC)

The Customs Union of Russia, Kazakhastan and Belarus

We can comply with GOST standards, and can provide the appropriate CU certificate.

Institute of Electrical and Electronic Engineers (IEEE)

For example:

IEEE 841

IEEE Standard for Petroleum and Chemical Industry – Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors – Up to and Including 370 kW (500 hp)

National Association of Corrosion Engineers (NACE)

For example:

ANSI/NACE MR0103	Petroleum, Petrochemical and Natural Gas Industries — Metallic Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments.
ANSI/NACE MR0175	Petroleum and Natural Gas Industries — Materials for Use in H2S-containing Environments in Oil and Gas Production.

National Electrical Manufacturers’ Association (NEMA)

For example:

ANSI/NEMA MG 1

Motors and Generators

Norsok

For example:

Norsok M-001	Materials Selection
Norsok M-501	Surface Preparation and Protective Coating

Tubular Exchanger Manufacturers’ Association (TEMA)

3. Company Standards

We are conversant with the standards and practices of EPCs such as Bechtel, Fluor, Jacobs, Technip, Wood Group (AMEC Foster Wheeler), etc. and those of oil and gas producers such as BP, ExxonMobil, Petronas, Royal Dutch Shell, Statoil, Total, etc.